netapp存儲安裝、配置和維護手冊v10-全文預覽

　　

【正文】 63 / 66文檔信息本安裝和維護手冊為 XXX 定制，為NetApp標準文檔之補充。 this node will be unable to takeover correctly(1) Normal boot.(2) Boot without /etc/rc.(3) Change password.(4) Assign ownership and initialize disks for root volume.(4a) Same as option 4, but create a flexible root volume.(5) Maintenance mode boot.Selection (15)? 5 進入維護模式 Tue Mar 20 08:49:16 GMT [:info]: All attached storage on the system is multipathed HA. You have selected the maintenance boot option: the system has booted in maintenance mode allowing the following operations to be performed: ? disk fcadmin fcstat sasadmin sasstat acpadmin halt help ifconfig raid_config storage sesdiag sysconfig version vol aggr sldiag environment led_on led_off sata acorn scsi disk_list haconfig fcdiag fctest disktest diskcopy xortest faltest outb disk_mung Type help mand for more details. In a cluster, you MUST ensure that the partner is (and remains) down, or that takeover is manually disabled on the partner node, because clustering software is not started or fully enabled in Maintenance mode. FAILURE TO DO SO CAN RESULT IN YOUR FILESYSTEMS BEING DESTROYEDContinue with boot? yTue Mar 20 08:49:40 GMT [:notice]: System rebooted after a halt mand.Tue Mar 20 08:49:41 GMT [console_login_mgr:info]: root logged in from console * Ipspace acpipspace created* disk show –a 查看當前控制器下的磁盤Local System ID: 1574659072 DISK OWNER POOL SERIAL NUMBER NOTE: Currently 12 disks are unowned. Use 39。 with o optiona to specify namer 20 08:53:39 GMT [:info]: changing ownership for disk (S/N J830SRPL) from unowned (ID 1) to (ID 1574659072).* disk assign disk assign: DisTk assigned but uunable to obtain eowner name. Re run 39。 with o optiona to specify namer 20 08:53:59 GMT [:info]: changing ownership for disk (S/N N000J71L) from unowned (ID 1) to (ID 1574659072)* disk assign disk assign: DisTk assigned but uunable to obtain eowner name. Re run 39。 with o optiona to specify namer. 20 08:54:13 GMT [:info]: changing ownership for disk (S/N N001YL7L) from unowned (ID 1) to (ID 1574659072)* disk assign disk assign: DisTk assigned but uunable to obtain eowner name. Re run 39。 with o option to specify name.Tue Mar 20 09:16:28 GMT [:info]: changing ownership for disk (S/N N000YG6L) from unowned (ID 1) to (ID 1574659048)* disk assign disk assign: Disk assigned but unable to obtain owner name. Rerun 39。 with o option to specify name.Tue Mar 20 09:16:37 GMT [:info]: changing ownership for disk (S/N N002K7KL) from unowned (ID 1) to (ID 1574659048) * disk show 查看磁盤的歸屬關系Local System ID: 1574659048 DISK OWNER POOL SERIAL NUMBER (1574659072) Pool0 N000V8KL (1574659048) Pool0 N000J0WL (1574659048) Pool0 N002K7KL (1574659072) Pool0 N000J65L (1574659072) Pool0 N000J71L (1574659072) Pool0 J830SRPL (1574659072) Pool0 N000J5ML (1574659072) Pool0 N001YL7L (1574659048) Pool0 N000YG6L * haltPhoenix TrustedCore(tm) Server Copyright 19852006 Phoenix Technologies Ltd.All Rights ReservedBIOS version: Portions Copyright (c) 20072011 NetApp, Inc. All Rights ReservedCPU = 1 Processors Detected, Cores per Processor = 2Intel(R) Xeon(R) CPU E5220 Testing RAM512MB RAM tested5120MB RAM installed6144 KB L2 CacheSystem BIOS shadowedUSB : MICRON eUSB DISKBIOS is scanning PCI Option ROMs, this will take few seconds... +++++++++++++++++++Boot Loader version Copyright (C) 20002003 Broad Corporation.Portions Copyright (C) 20022008 NetAppCPU Type: Intel(R) Xeon(R) CPU E5220 LOADERB auyobootInvalid mand: auyobootAvailable mands: version, update_flash, netboot, boot_diags, boot_backup, boot_primary, boot_ontap, sp, flash, bye, set, lsmod, autoboot, go, boot, load, ndp, ping, arp, ifconfig, show, savenv, saveenv, unsetenv, setdefaults, setenv, printenv, help*** mand status = 1LOADERB autobootLoading X86_64/kernel/:0x200000/49123928 0x30d9258/27512016 0x4b15f28/7980237 0x52b23f5/3 Entry at 0x00202018Starting program at 0x00202018MTRR0, will be reset to map region 3G to 4G as UCBBSP on this platform is 0x0000000000000180ipmi_init_alloc_request_pool succeed (pool entries 0x80,size per entry 0xe0)ipmi_init0: DONE.Press CTRLC for special boot menuIPMI:IPMI device rev. 2, firmware rev. , version IPMI:Number of channels 0ipmi_init1: DONE.Special boot options menu will be available.Chelsio T3 RDMA Driver version Ipspace iwarpipspace createdTue Mar 20 09:18:46 GMT [:error]: Initialization failed on Fibre Channel adapter 0c.Tue Mar 20 09:18:46 GMT [:erro