固定平臺、走道、樓梯與梯子的設計、施工與安裝培訓資料(已修改)

　

【正文】 固定平臺、走道、樓梯與梯子的設計、施工與安裝培訓資料作者：日期：Australian Standard174。澳大利亞標準174。Fixed platforms, walkways, stairways and ladders — Design, construction and installation固定平臺、走道、樓梯與梯子的設計、施工與安裝This Australian Standard was prepared by Committee SF/13, Platforms, Gangways, Stairways and Ladders. It was approved on behalf of the Council of Standards Australia on 9 September 1992 and published on 16 November 1992.本《澳大利亞標準》是由SF/13平臺、通道、樓梯與梯子委員會編制的。1992年9月經澳大利亞標準委員會通過，1992年11月16日出版。The following interests are represented on Committee SF/13:SF/13委員會由以下單位參加：Aluminium Development Council鋁業發展委員會Bureau of Steel Manufacturers of Australia 澳大利亞鋼鐵制造局Confederation of Australian Industry澳大利亞工業聯合會Department of Employment, Vocational Education, Training and Industrial Relations, Qld昆士蘭州就業、職業教育、培訓與勞資關系部Department of Labour and Industry, Tas.塔斯馬尼亞州勞工部Master Builders 建筑商協會Construction and Housing Association of Australia澳大利亞建筑與住房協會Pacific Power太平洋電力公司Public Works Department, .新南威爾士州公共工程部Royal Australian Institute of Architects皇家澳大利亞建筑師協會Water Board, SydneyIllawarraBlue Mountains 水理事會，悉尼伊拉瓦拉藍山流域WorkCover Authority of New South Wales新南威爾州工傷保險局Review ofAustralian Standards. To keep abreast ofprogress in industry, Australian Standards are subject to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto.澳大利亞標準的評審。為了保持標準與工業發展同步，澳大利亞標準需要定期進行評審并發布修訂本，必要時出版新的版本以保持更新。因此，標準使用者使用的版本必須是最新版本，同時需要使用所有修正版本的內容。《澳大利亞標準》的評審：為了保持與工業進步接軌，《澳大利亞標準》接受定期評審，并通過發行修正內容或新版本（必要時）來保持最新。因此本標準的使用者可以確信其使用的是最新版本以及版本修正內容。Full details of all Australian Standards and related publications will be found in the Standards Australia Catalogue of Publications。 this information is supplemented each month by the magazine ‘The Australian Standard’, which subscribing members receive, and which gives details of new publications, new editions and amendments, and of withdrawn Standards.澳大利亞標準局出版的《標準目錄》收集了所有澳大利亞標準的詳細信息和相應出版物，此信息每月在雜志《澳大利亞標準》上進行補充說明，已訂閱會員會收到此雜志，另外該雜志還會介紹新出版物、新版本和修訂本以及廢止標準的詳細信息。有關所有澳大利亞標準的詳細信息和相關出版物可以參見“澳大利亞標準出版目錄”；每月出版的《澳大利亞標準》會對上述信息做出補充。訂閱此月刊的讀者可從這本雜志中了解到新出版物、新版本和修正內容以及已撤銷標準的詳情。Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia, are weled. Notification of any inaccuracy or ambiguity found in an Australian Standard should be made without delay in order that the matter may be investigated and appropriate action taken.我們歡迎提出有關改進澳大利亞標準方面的建議，歡迎寫信到澳大利亞標準局。如發現澳大利亞標準存在任何不準確或含糊不清的內容，請及時告訴我們以便我們做出調查并采取適當措施。歡迎對《澳大利亞標準》提出的改進建議，可寄往澳大利亞標準局總公司。若發現《澳大利亞標準》中出現任何錯誤或含糊之處，請立即通知我們，以便我方調查問題并采取適當措施。This Standard was issued in draft form for ment as DR 90065.本《標準》作為DR 90065草案發布，以征求意見。Australian Standard174。澳大利亞標準174。Fixed platforms, walkways, stairways and ladders — Design, construction and installation固定平臺、走道、樓梯與梯子的設計、施工與安裝First published as AS CA101938.首次刊印作為AS CA 101938Second edition 1963. Third edition 1966. Fourth edition 1971第二版1963年，第三版1966年，第四版1971年. Revised and redesignated AS 16571974.修訂后并重新命名為AS 16571974Second edition 1985. Third edition 1992.第二版1985年，第三版1992年PUBLISHED BY STANDARDS AUSTRALIA (STANDARDS ASSOCIATION OF AUSTRALIA) 1 THE CRESCENT, HOMEBUSH, NSW 2140澳大利亞標準局（澳大利亞標準協會）出版地址：1 THE CRESCENT, HOMEBUSH, NSW 2140 PREFACE序言This Standard was prepared by the Standards Australia Committee on Platforms, Gangways, Stairways and Ladders, to supersede AS 16571985.本《標準》由平臺、通道、樓梯和梯子澳大利亞標準委員會編制，取代AS 16571985標準。Changes to the Standard include —本《標準》做出的修改包括(a) reducing the minimum wall thickness of steel piping which may be used。 降低了可能使用的鋼管的最小壁厚。(b) incorporating a minimum tensile yield stress requirement for aluminium alloys。 加入對鋁合金最小拉伸屈服應力的要求。(c) deleting references to specific aluminium alloys and tempers。 刪去對特殊特定鋁合金及韌度調和物的介紹引述。(d) updating the dimensions of steel sections other than piping, to reflect current manufacturing practices。 and 根據現行有效的制造規范，更新除鋼管道外的型鋼尺寸，以求反映當前制造規范；以及(e) provision of test methods to determine the integrity of guardrail systems, and the strength of the connection between guardrail posts and the supporting structure. 提供規定了測定護欄系統完整性以及護欄立柱與支撐結構之間接點連接強度的方法。169。 Copyright STANDARDS AUSTRALIA版權歸澳大利亞標準局Users of Standards are reminded that copyright subsists in all Standards Australia publications and software. Except where the Copyright Act allows and except where provided for below no publications or software produced by Standards Australia may be reproduced, stored in a retrieval system in any form or transmitted by any means without prior permission in writing from Standards Australia. Permission may be conditional on an appropriate royalty payment. Requests for permission and information on mercial software royalties should be directed to the head office of Standards Australia.提醒使用《標準》的用戶注意，澳大利亞標準局所有出版物和軟件均受版權保護。除非《版權法》規定或滿足以下條件外，在未獲得澳大利亞標準局書面許可的前提下，任何人不得翻制澳大利亞標準局發行的出版物或軟件，也不得以任何形式儲存在檢索系統中或經任何形式傳播。許可可能附有一定條件或支付適量特約使用金。許可申請及商業軟件版權相關信息請直接呈報至澳大利亞標準局總公司。Standards Australia will permit up to 10 percent of the technical content pages of a Standard to be copied for use exclusively inhouse by purchasers of the Standard without payment of a royalty or advice to Standards Australia.澳大利亞標準局允許本《標準》購買方可以復制標準中10%的技術內容以便內部使用，無需支付版權或告知標準局。Standards Australia will also permit the inclusion of its copyright material in puter software programs for no royalty payment provided such programs are used exclusively inhouse by the creators of the programs.澳大利亞標準局還允許軟件開發者將受版權保護的資料包含入電腦軟件程序中，無需支付特約使用金，前提是此類軟件專供開發者內部使用。Care should be taken to ensure that material used is from the current ed