蓋體注塑模具設計畢業論文(已修改)
2026-06-29 14:26 本頁面
【正文】 蓋體注塑模具設計The cover of injection mold design摘 要本文是關于盒蓋注塑模具的設計，塑件雖然不是很復雜，但其設計的難點在于側向抽芯機構和澆注系統的設計。本次設計主要使用 Pro/E 軟件，結合生產實踐來設計盒蓋注塑模具的整體結構，通過對塑件形狀、尺寸等方面的分析來確定其工藝。主要包括分型面的選擇,澆注系統的設計,成型零件的計算,側向抽芯機構的設置,頂出機構和冷卻系統的設計等，此外還對其脫模力進行計算，并選擇合適的注塑機。本次設計使用 Pro/E，EMX 來進行模架、螺釘、頂桿等零件的選取，設計安裝完成后，直接導出 2D 裝配圖及相關零件圖，大大縮短了設計時間。關鍵詞：注塑模具；側向抽芯； 澆注系統AbstractThis is the design on the lid of the plastic injection mold, the plastic parts is not very plicated, but the difficulty lies in its design of the side coredrawing institutions and gating system design. The design using Pro / E software, bined with production practices to design the overall structure of the lid injection molds and the plastic parts shape, size and other aspects of the analysis to determine the process. Including the choice of the parting surface, gating system design, calculation of the molded part, side corepulling mechanism set up, ejection mechanism and the cooling system design, in addition to the ejection force be calculated, and choose the appropriate injection molding machine. The design using Pro/E, the EMX to select the mold, screws, ejector parts, design and installation is plete, direct export 2D assembly drawings and part drawings greatly reducing the design time. Keywords: Injection mold。 Side corepulling。 feed system目 錄第一章 緒論 .............................................................................................1 引言 .........................................................................................................................1 我國模具技術的現狀及今后發展趨勢 .................................................................1 注塑模具的發展及前景 .........................................................................................2第二章 注塑件的設計 .............................................................................4 材料性能 .................................................................................................................4 脫模斜度 .................................................................................................................4 壁厚 .........................................................................................................................5 圓角 .........................................................................................................................5 塑件的尺寸精度及表面質量 .................................................................................5 尺寸精度 .......................................................................................................5 塑件的表面質量 ...........................................................................................6 塑件體積和質量的計算 ...............................................................................6第三章 注塑機的選擇 .............................................................................8 選定注射機 .............................................................................................................8 注射壓力校核 .........................................................................................................8 鎖模力校核 .............................................................................................................8 模具厚度校核 .........................................................................................................9 開模行程校核 .........................................................................................................9第四章 模具設計 ...................................................................................11 分型面的設計 .......................................................................................................11 型腔數的確定 .......................................................................................................11 模具澆注系統設計 ...............................................................................................12 主流道和分流道設計 .................................................................................12 澆口套設計 .................................................................................................14 冷料穴及拉料桿 .........................................................................................15 排氣方式 .....................................................................................................15 成型零件設計 .......................................................................................................16 型腔及型芯的設計 .....................................................................................16 工作尺寸計算 ..........
環評公示相關推薦
鄂ICP備17016276號-1