正文內容

自動化生產線--外文翻譯-其他專業(編輯修改稿)

2026-02-24 02:42 本頁面

　

【文章內容簡介】 were developed (circa in 1968) when General Motors Corps, and other automobile manufacturers were experimenting to see if there might be an alternative to scrapping all their hardwired control panel of machine tools and other production equipment during a model changeover. This annual tradition was necessary because rewriting of the panels was more expensive than buying new ones. The automotive panies approached a number of control equipment manufacturers and asked them to develop a control system that would have a longer productive life without major rewriting, but would still be understandable to and repairable by the plant personnel. The new product was named a “programmable controller”. The processor part of the PLC contains a central processing unit and memory. The central processing unit (CPU) is the “traffic direction” of the processor, the memory stores information. Coming into the processor are the electrical signals from the input devices, as conditioned by the input module to voltage levels acceptable to processor logic. The processor scans the state of I/O and updates outputs stored in the memory of the PLC. For example, the processor may be programmed so that if an input connected to a limit switch is true (limit switch closed), then a corresponding output wired to an output module is to be energized. This processor remembers this mand through its memory and pares on each scan to see if that limit switch is, in fact, closed. If it is closed ,the processor energizes the solenoid by turning on the output module. The output device, such as a solenoid or motor starter, is wired to an output module’s terminal, and it receives its shift signal from the processor, in effect, the processor is performing a long and plicated series of logic decisions. The PLC performs such decisions sequentially and in according with the stored program. Similarly, analog I/O allows the processor to make decisions based on the magnitude of a signal, rather than just if it is on or off. For example, the processor may be programmed to increase or decrease the steam flow to a boiler (analog output) based on a parison of the actual temperature in the boiler (analog input ) This is often performed by utilizing the builtin PID (proportional, integral, derivative) capabilities of the processor. Because a PLC is “software based”, its control logic functions can be changed by reprogramming its memory. Keyboard programming devices facilitate entry of the revised program, which can be design to cause an existing machine or process to operate in a different sequence or to different level of, or binations of stimuli. Hardware modifications are needed only if additional, changed, or relocated input/output device are involved. 3. Automated Assembly Assembly in the manifacturing process consists of putting together all the 4 ponent parts and subassemblies of a given product, fastening, performing inspection

點擊復制文檔內容

環評公示相關推薦

自動化生產線伸縮換向單元的設計-資料下載頁

【總結】自動化生產線伸縮換向單元的設計**職業技術學院電氣工程系電氣自動化07-2班李****502***2009年12月4日內容摘要：當今，自動化產生線已逐漸廣泛地應用于各類流水線上，其發展、完善和各種相關技術的進步及互相滲透是緊密相連的。而伸縮換向單元所涉及的技術領域在自動化生產線中的應用是很廣泛的

2026-06-21 09:05

辦公自動化外文翻譯--辦公自動化系統-其他專業-資料下載頁

【總結】1外文翻譯：辦公自動化系統原文來源：JeCardoso.EncyclopediaofMedicalDevicesandInstrumentation[M].SecondEdition.JohnWiley&Sons.Inc.2021.149~157.譯文正文：介紹這篇文章的目的是從企業專家觀

2026-01-10 07:47

u形生產線的分析與優化外文翻譯-其他專業-資料下載頁

【總結】ANALYSISANDOPTIMIZATIONOFAU-SHAPEDPRODUCTIONLINEKatsuhisaOhnoKoichiNakadeNagoyaInstituteofTechnology(ReceivedAugust21,1995;RevisedJanuary16,1996)AbstractInthejus

2026-01-10 06:53

測控技術與儀器自動化外文翻譯-其他專業-資料下載頁

【總結】資料2翻譯譯文如何將硬件軟件化，軟件通用化成為虛擬采集系統的研究熱點。本課題以串行虛擬采集系統為研究對象，設計了一個硬件成本低，軟件功能強的虛擬采集系統。本文首先在介紹虛擬儀器和采集系統發展的基礎上，對采集系統的原理進行分析，研制了一個隨著計算機軟硬件技術的發展，虛擬儀器技術被廣泛地應用到數據采集系統，16位精度的RS232數據采集卡。在LabVIEW

2026-01-10 03:49

辦公自動化系統概述外文翻譯-其他專業-資料下載頁

【總結】西安郵電大學畢業設計（論文）外文文獻翻譯系別：計算機科學與技術專業：計算機科學與技術班級：計科0803班

2026-01-10 07:47

辦公自動化系統外文資料翻譯-其他專業-資料下載頁

【總結】畢業設計(論文)外文資料翻譯學院（系）：計算機科學與技術學院專業：信息管理與信息系統姓名：陳文明學號：202117020212

2026-01-10 07:47

自動化生產線安裝與調試畢業論文-資料下載頁

【總結】三門峽職業技術學院論文題目：自動化生產線的調試與維護專業：機電工程學院目錄第一章嵌入式組態技術在自動化生產線中的應用 MCGS嵌入版 MCGS嵌入版組態軟件的構成實時數據庫主控窗口設備窗口用戶

2026-06-19 06:18

自動化生產線伸縮換向單元的設計要點-資料下載頁

【總結】n更多資料請訪問.(.....)此資料來自：.（....）聯系電話：020-.值班手機：提供50萬份管理資料下載3萬集企業管理資料下載1300GB高清管理講座硬盤拷貝更多企業學院：...../Shop/《中小企業管理全能版》183套講座+89700份資料...../Shop/《總經理、高層管理》49套講座+16388份資料..

2026-06-16 03:37

自動化生產線安裝與調試畢業設計-資料下載頁

【總結】水利電力職業技術學院畢業設計說明書姓名：編號：設計題目：基于485通信的PLC控制系統設計

2025-11-24 17:17

自動化專業外文翻譯--運算放大器-其他專業-資料下載頁

【總結】UNIT2A:TheOperationalAmplifierOneproblemwithelectronicdevicescorrespondingtothegeneralizedamplifiersisthatthegains,AuorA~,dependuponinte

2026-01-10 02:44

外文翻譯---基于slp法的工業生產線布局改善-其他專業-資料下載頁

【總結】原文題目：ImprovementofIndustrialProductionProcessDesignUsingSystematicLayoutPlanning基于SLP法的工業生產線布局改善Nik?aFAFANDJEL，RajkoRUBE?A，TinMATULJAAbstractModernindustrialproducti

2026-01-10 09:28

生產線平衡外文翻譯--對于e類型的簡單生產線平衡問題的解決過程中文-其他專業-資料下載頁

【總結】中文5660字本科畢業論文外文翻譯外文譯文題目：對于E類型的簡單生產線平衡問題的解決過程出處：Computers&IndustrialEngineering,2021,61(3):824-830學院:機械自動化專業:工業工程學

2026-01-10 03:26

大批量生產的自動化生產線-精簡-資料下載頁

【總結】第六章大批量生產的自動化生產線從1924年英國建立和使用了第一條自動生產線起，自動線在機械工業中的應用已有幾十年的歷史。采用自動輸送裝置，將若干臺自動機床按工序順序的排列聯成一個整體，并用控制系統按規定的工藝程序來自動操縱工件的輸送、定位、夾緊和機械加工的生產線稱為機械加工自動化生產線，簡稱自動線。

2026-04-24 08:19

自動化專業畢業設計外文資料翻譯--catiav5的自動化-其他專業-資料下載頁

【總結】畢業設計(論文)外文資料翻譯系：機械系專業：車輛工程專業姓名：學號：070102234

2026-01-10 02:43

自動化生產線設計-職業學院畢業論-資料下載頁

【總結】滄州職業技術學院畢業設計11自動化生產線的設計2021屆電氣工程系專業機電一體化學號15Z31303029學生姓名張浩

2026-05-26 13:32

自動化生產線--外文翻譯-其他專業(編輯修改稿)

自動化生產線--外文翻譯-其他專業-wenkub.com

自動化生產線--外文翻譯-其他專業(已改無錯字)

自動化生產線--外文翻譯-其他專業-資料下載頁

自動化生產線--外文翻譯-其他專業(參考版)

資源集合網站地圖資源列表

文庫吧　www.gangdaoshai.cn