正文內容

織物服裝濕傳遞性能不同測定方法的對比外文文獻翻譯-資料下載頁

2025-12-30 10:36本頁面

　　

【正文】 in a graph. After fitting the data with a straight line by linear regression, the slope of the line is then the moisture vapour resistance of a single layer of the fabric sample. . Sweating fabric manikin (Walter) Sweating fabric manikin (Walter) is the first sweating fabric manikin developed by Fan and his coworkers. Figure 4 shows the manikin wearing a Tshirt during the test. The experiment was carried out in a climatic chamber at 177。 ℃ and 177。 2% RH with an air velocity of 177。 m s?1. Figure4 Sweating fabric manikin (Walter) The Tshirts made of the eight fabrics were all in the same size. During the tests, the pants were kept the same for all Tshirt samples. The total moisture vapour resistance was calculated using the following formula: ese asasset RH )HPA (PR = （ 4） where A is the surface area of the manikin, Pss is the saturated vapour pressure at the skin temperature, Psa is the saturated vapour pressure at the ambient temperature and Ha is the ambient relative humidity (%), and Res is the moisture vapour resistance of the fabric skin which was calibrated in advance (Res=, He is the evaporative heat loss. He was calculated from 12 the measurement of evaporative water loss, He = λQ, where λ is the heat of evaporation of water at the skin temperature (λ= at 34 ℃ ), Q is the rate of evaporative water loss per hour. 4. Conclusions In this study, four instruments were used to evaluate the water vapour transmission rate or moisture vapour resistance of air permeable functional Tshirt fabrics/garments. It can be concluded from this investigation that, for typical functional Tshirt fabrics, the test results from the four test methods, namely themoisture transmission test (ModelCS141),ASTM E96 cup method, novel sweating guarded hot plate and the sweating fabric manikin (Walter) correlate well. The results from each of these tests can be pared with those from another test using the correlation trend lines found in this study. Some deviations from the correlation trend lines can be explained by the effect of the different testing conditions on the different types of fabrics. Author： F Kar, J Fan and W Yu Nationality： Hong Kong (Institute of Textiles and Clothing, The Hong Kong Polytechnic University) Originate from： MEASUREMENT SCIENCE AND TECHNOLOGY. 18 (2022) 13

點擊復制文檔內容

公司管理相關推薦

建筑項目招投標外文翻譯外文文獻英文文獻-資料下載頁

【總結】第一篇：建筑項目招投標外文翻譯外文文獻英文文獻 Buildingengineeringbidding Abstract:Nowadaysintheengineeringconstructionin...

2025-10-06 10:16

會計外文文獻翻譯-資料下載頁

【總結】原文題目：《評述教育會計專業》作者：邁克爾卡夫金原文出處：SchoolofAccountingandFinance,UniversityofWollongong,Wollongong,Australia會計教育會計教育。一般來說，從業者似乎已不愿想改變-要離開自己的舒適區-慢，并已承認在與倫理，環境惡化，全球化相關的地區更廣泛的社會問題所提出的問題，增加業

2026-01-08 22:46

1300外文文獻翻譯-資料下載頁

【總結】第一篇：1300外文文獻翻譯 AgriculturalLandandRegulationintheTransitionEconomyofRussiaEkaterinaGnedenko1&Michae...

2025-11-06 07:05

機械類數控外文翻譯外文文獻英文文獻數控-資料下載頁

【總結】NumericalControlOneofthemostfundamentalconceptsintheareaofadvancedmanufacturingtechnologiesisnumericalcontrol(NC).PriortotheadventofNC,allmachinetoolsweremanualopera

2026-06-18 03:44

外文翻譯(中文)評價表面處理對混凝土耐久性能的影響-外文文獻-資料下載頁

【總結】中文4290字畢業論文外文資料及其譯文外文名稱：Evaluationoftheperformanceofsurfacetreatmentsonconcretedurability中文名稱：評價表面處理對混凝土耐久性能的影響出處：Zhaoetal./JZhejiangUniv-Sci

2026-05-03 11:54

機械外文文獻及翻譯-資料下載頁

【總結】內蒙古工業大學本科畢業設計外文翻譯1與機械相關的外文及翻譯MultidisciplinaryDesignOptimizationofModularIndustrialRobotsbyUtilizingHighLevelCADTemplates1、IntroductionInthedesignofplexan

2025-10-25 00:05

外文文獻翻譯數學專業-資料下載頁

【總結】重慶理工大學文獻翻譯二級學院數學與統計學院譯文

2025-11-25 12:04

銀行改革外文文獻翻譯-資料下載頁

【總結】畢業論文英文資料翻譯學院：商學院專業：班級：姓名：

2026-05-02 14:44

智能車外文文獻翻譯-資料下載頁

【總結】智能車外文文獻翻譯（中文+英文）--畢業設計智能車我們的社會充斥著各種各樣的機器智能在過去的世紀我們目睹越來越多日常生活中的苦差事被機器設備解決如洗衣機然而一個既枯燥又危險的保留區域就是日常駕駛汽車2021年120萬人死于交通事故這是所有全球21％死亡死因排名第11如果這種

2025-11-25 02:25

模具專業外文文獻翻譯-資料下載頁

【總結】1模具專業文獻翻譯外文原文：Modernfasteconomymanufacturemoldtechnology1introductionAlongwiththeglobaleconomydevelopment,thenewtechnologicalrevolutionmadethenewp

2025-10-23 00:49

市場營銷原理外文翻譯外文文獻翻譯-資料下載頁

【總結】-1-中文4350字本科畢業論文外文文獻及譯文文獻、資料題目：New-ProductPricingStrategies文獻、資料來源：著作文獻、資料發表（出版）日期：-2-外文文獻：Prin

2026-05-03 03:16

挖掘機-外文翻譯-外文文獻中英翻譯-資料下載頁

【總結】挖掘機臂液壓系統的模型化參量估計摘要首先介紹了液壓挖掘機的一個改裝的電動液壓的比例系統。根據負載獨立流量分配（LUDV）系統的原則和特點，以動臂液壓系統為例并忽略液壓缸中的油大量泄漏，建立一個力平衡方程和一個液壓缸的連續性方程。基于電動液壓的比例閥門的流體運動方程，測試的分析穿過閥門的壓力的不同。結果顯示壓力的差異并不會改變負載，。然后假設穿過閥門的液壓油與閥芯的位移成正比并且

2026-07-27 06:16

通信工程網絡技術外文翻譯文獻翻譯外文文獻-資料下載頁

【總結】外文翻譯譯文題目：在WDM代理網絡中基于蟻群的動態路由和波長分配原稿題目：DynamicRoutingandWavelengthAssignmentinWDMNe

2026-05-23 00:27

測繪工程外文文獻翻譯-資料下載頁

【總結】1附錄A外文文獻譯文土耳其科技雜志第4卷，第2期，139-155，2021用MicrosoftExcelSOLVER對大地測量網進行平差LeventTA??IFIRAT大學，工程學院，土木工程署，23100，埃拉澤，土耳其（收稿日期：二○○九年六月二十日；接受日

2025-12-08 21:15

外文文獻翻譯-液壓系統-資料下載頁

【總結】液壓系統一個完整的液壓系統由五個部分組成，即動力元件、執行元件、控制元件、無件和液壓油。動力元件的作用是將原動機的機械能轉換成液體的壓力能，指液壓系統中的油泵，它向整個液壓系統提供動力。液壓泵的結構形式一般有齒輪泵、葉片泵和柱塞泵。執行元件(如液壓缸和液壓馬達)的作用是將液體的壓力能轉換為機械能，驅動負載作直線往復運動或回轉運動。控制元件(即各種液壓閥)在液

2025-10-28 00:18