沃爾瑪產品檢驗標準-資料下載頁

　　

【正文】 含裝飾部件)325 SOP ≥ (Gray Scale) UV Light 30W, 20cm x 3 hrs ≥ 4 級( 30瓦 UV, 20cm x 3 小時 SHOE LACES 鞋帶測試項目測試方法結果要求ANTIYELLOWING TO UV LIGHT 耐黃測試(UV光照射)White Color Laces 白色鞋帶325 SOP ≥ (Gray Scale) UV Light 30W, 20cm x 3 hrs ≥ 4 級( 30瓦 UV, 20cm x 3 小時PHENOLIC YELLOWING 酚黃測試White Color Laces白色鞋帶ISO 105X18 ≥ (Gray Scale) COLORFASTNESS TO CROCKING 摩擦色牢度Dark Color Laces w/White Footwear (only) 白色鞋子的深顏色鞋帶AATCC 8 (Gray Scale) Dry ≥ Wet ≥ Note: Colorfastness performed on cotton and cotton/poly laces 褪色測試適用于棉和滌棉鞋帶LACE TO LACE ABRASION RESISTANCE 鞋帶與鞋帶間耐磨測試Athletic, Work Shoes amp。 Boots, Hikers, and Tredsafe Footwear 運動鞋，工作鞋地，靴子，旅游鞋SATRA TM 154 No lace breakage or excessive visible surface damage @ ≥ 3,000 cycles ≥3,000次時表面無明顯破損和斷裂Dress, Casual and Vulcanized Footwear 時裝鞋，休閑鞋，硫化鞋No lace breakage or excessive visible surface damage @ ≥ 1,000 cycles ≥1,000次,表面無明顯破損和斷裂 LINKING TAPE魔術帶測試項目測試方法結果要求PEELING STRENGTH 剝離強度All ASTM D5170 ≥ 170 g / cm SHEARING STRENGTH 剪力強度測試All ASTM D5169 ≥ 750 g / cm2 HEELS 鞋跟測試項目測試方法結果要求HEEL FATIGUE RESISTANCE耐疲勞測試Heels ≥ 3 cm in height which contain either a steel pin or steel tube reinforcement 適用于內有鋼釘或鋼管且高度≥3CM的跟SATRA TM21 No Breakage @ 14,000 impacts w/ joule for slender heel HEEL IMPACT RESISTANCE撞擊測試Required for the following heels: Height 57 cm w/external stem perimeter ≤5 cm amp。 Height 7 cm w/external stem perimeter ≤ 10 cm 適用于跟高度57cm且跟主干周長≤5 cm；及跟高度 7 cm 跟主干周長≤ 10 cm BS 5131 167。 Modified No cracking, breaking, or bending ( 3 mm) of heel stem after being subjected to 10 consecutive impacts of increasing force, and No cracking or breaking of the heel stem after an additional 17 impacts of increasing force, as specified in BS 5131167。 以每次力度遞增,10次連續撞擊后無(大于3MM)破裂或彎曲等現象，繼續以每次力度遞增，繼續進行17次的撞擊后無開裂、斷裂或彎曲等現象（以BS 5131167。 4要求的力度） TOPLIFTS 天皮測試項目測試方法結果要求EFFECTIVE TOPLIFT THICKNESS實用厚度Toplift less than 625 mm2 in surface area 天皮觸地面面積小于625 mm2VISUAL EVALUATION / CALIPER Must be constructed of polyurethane (PU) or TPR 必須是PU或TPR材質Toplift less than 8 mm across in any direction 天皮任一平面方向小于8毫米Must include a steel or diecast alloy stem 必須使用鋼或壓鑄合金材質Minimum overall thickness 最小厚度Men’s amp。 Women’s 男鞋,女鞋Children’s 童鞋Distance between wear surface amp。 insert metal head 天皮金屬插柱離觸地面Distance above amp。 around the sides of the insert metal head 天皮金屬插柱離上部和周圍任一邊緣6 mm4 mm3 mm2mmAll VISUAL EVALUATION Must be ribbed or textured 所有天皮要求有底紋ABRASION RESISTANCE 耐磨PU Toplift PU天皮TEST METHOD SZ A02 Loss in thickness is mm / cm2 磨損厚度 mm / cm2PVC Toplift PVC天皮Loss in thickness is mm / cm2磨損厚度 / cm2TPR Toplift TPR天皮Loss in thickness is mm / cm2磨損厚度 mm / cm2PULLING STRENGTH OF HEAD釘頭拉力強度All 所有天皮SATRA TM108 14 kg EXPOSED METAL HARDWARE外露鐵件測試項目測試方法結果要求CORROSION RESISTANCE 防銹測試(耐腐蝕)Must be properly finished to inhibit corrosion必須適當做防銹處理319 SOP 100176。F, 100% RH12 hrs No corrosion on surface 100℉,100%濕度，放置12小時表面無銹痕 ZIPPERS 拉鏈測試項目測試方法結果要求PULLER ATTACHMENT STRENGTH 拉鏈頭拉脫強度Nonfunctional (decorative) zippers are excluded from tests 非功能性(裝飾性)拉鏈不需測試Adults amp。 Boys 成人鞋/男童鞋SATRA TM52 ≥ 25 kg Misses / Youth 女童/青年鞋≥ 20 kg Infant / Toddler 嬰童/學步鞋≥ 15 kg SLIDER LOCKING STRENGTH 閉鎖強度測試Adults amp。 Boys 成人鞋/男童鞋SATRA TM226 ≥ 7 kg Misses / Youth 女童/青年鞋≥ 5 kg Infant / Toddler 嬰童/學步鞋≥ kg TOP amp。 BOTTOM STOP ATTACHMENT STRENGTH鎖頭和鎖尾拉脫強度All SATRA TM53 ≥ kg BREAKING STRENGTH OF CHAIN CROSSWISE STRENGTH拉鏈齒嚙合強度 (橫向抗拉)All SATRA TM51 ≥ 35 kg STEEL SHANKS 鋼芯測試項目測試方法結果要求HARDNESS 硬度All ASTM E18 45 TO 55 HRC amp。 Tempered STIFFNESS 韌性強度 50 mm Heel Height 鞋跟高度 50 mmSATRA TM58 ≥ 400 50 74 mm Heel Height 鞋跟高度50 74 mm≥ 800 75 99 mm Heel Height 鞋跟高度75 99 mm≥ 1200 ≥100 mm Heel Height 鞋跟高度≥100 mm≥ 1600 GORES松緊帶測試項目測試方法結果要求RESISTANCE TO REPEATED EXTENSION 反復拉伸性能測試Gores Infant/Toddler Footwear嬰童鞋/學步鞋Others 其他SATRA TM103 10% Rubber thread breakage, and no damage on surface 5,000 cycles 10,000 cycles 5,000次10,000次反復延伸后表面無破損且小于10%的橡筋斷裂 LININGS 內里測試項目測試方法結果要求測試項目測試方法Lining Material 內里材料AATCC 8 (Gray Scale) Dry Wet Fabric (including silk screen print) 紡織品（包含印刷）≥ ≥ Denim 牛仔布≥ ≥ Leather 皮革≥ ≥ Note: White or light color linings are excluded 不適用于白色或淺色內里COLORFASTNESS TO PERSPIRATION 褪色測試（汗浸色牢度）Fabric (including silk screen print) 紡織品（包含印刷）AATCC 15 (Gray Scale) ≥ Denim 牛仔布≥ Leather 皮革≥ Note: The following footwear categories / ponents are excluded: ?Soccer Slides amp。 Sandal Straps ?Foldings amp。 Bindings in the topline / collar area ?White or light color linings 不適用于下列鞋了及部件:足球鞋amp。涼鞋幫面鞋口/領口折邊amp。捆邊白色或淺色內里FORMALDEHYDE甲醛含量Fabric Lining Material for 紡織品內里材料Infant sizes 16 amp。 Toddler sizes 711 嬰童16碼amp。學步鞋711碼Prescreening spot test 預篩選點測試 Extraction test 萃取測試AATCC 94 JIS 1041L 20 ppm ANTIYELLOWING TO UV LIGHT 耐黃測試 – UV光照射White Color Lining Materials which are located on area of the shoe that is exposed to light (. topline / collar area) 暴露在陽光下的鞋子白色內里材料(如鞋口/領口)325 SOP ≥ (Gray Scale) UV Light 30W, 20cm x 3 hrs Note: Sock linings are excluded for closedup footwear 不適用于密幫鞋的前墊皮PHENOLIC YELLOWING 酚黃測試White Color Fabric 白色布料ISO 105X18 ≥ (Gray Scale) ABRASION RESISTANCE 耐磨測試Counter Linings –后踵套All fabric Leather, amp。 LAMI Suede 所有紡織品,皮鞋amp。納米絨皮SATRA TM31 Exhibits no wear through Tested dry @ 12 Kpa load for the following number of revolutions:以干式12Kpa的重力, 通過以下次數后無磨損Heavy Duty –高強度Work Shoes*, Hikers*, Tredsafe *Except men’s work shoes and hikers 工作鞋,旅游鞋,不含男式工作鞋,旅游鞋51,200 revolution